Mic Mods vs. DIY Mic Kits

There are two good roads to a better-sounding condenser mic. You can build it yourself from a kit, or you can have someone build or rebuild it for you. I’m a fan of both. Plenty of my favorite mics started life as somebody’s kit, and I’ll be selling kit parts of my own soon.

Here’s how RockScience compares with two of the best-known DIY shops, Microphone-Parts.com (Mic Parts) and Mic & Mod, so you can pick the one that fits how you like to work.

At a glance

RockScienceMicrophone-Parts.comMic & Mod
Main focusFinished rebuilds and custom buildsDIY mic kits and circuit mod kitsDIY vintage-style mic kits
Who does the solderingMeYou (they also offer mail-in mods and built-to-order mics)You
Upgrade the mic you already ownYes: send it in and I rebuild itYes: model-specific circuit kits for MXL, Studio Projects, Audio-Technica, AKG and moreNo: Kits are complete mics, body included
Transformer-coupled optionsMy specialty: KM 84-inspired BFM circuit in LDC and SDC builds, with a choice of four transformersKM 84-style transformer FET and 251-style tube circuitsVintage-inspired designs, including tube kits
Other gearMicrophones onlyCapsules, grilles, shockmounts, componentsMic parts and 500-series rack kits
Best forPeople who want a great mic without picking up a soldering ironDIYers upgrading a budget mic or building from scratchDIYers who want to build a classic
Based on each shop’s website in November 2026. Check their sites for current products.

Frequently asked questions

Should I build a kit or buy a rebuilt mic?

If you enjoy soldering, have the tools and want to learn how your mic works, build a kit. It’s the best value in audio, and it’s a lot of fun. If you’d rather spend that time recording, or you want a particular capsule-and-transformer combination dialed in and tested for you, that’s what I do.

What’s the difference between a mod kit and a rebuild?

Mostly, who holds the iron. A circuit mod kit gives you the boards and parts to replace your mic’s stock electronics yourself. A RockScience rebuild is the same idea done for you: I gut the mic, install a new circuit and capsule, then test it before it ships back.

Is Microphone-Parts.com any good?

Yes. Mic Parts has been at this a long time, and their kits come with excellent model-specific instructions. I’ve built several TL and TC kits and they are excellent. If you want to mod your own mic, they have a kit for a long list of donor mics.

What about Mic & Mod?

Mic & Mod is a DIY shop in France that has sold vintage-style microphone kits since 2013, modeled on classics like the U47, U67, U87, 251 and C12. Their tube kits come with a pre-assembled power supply. They also sell mic parts and 500-series rack kits, so they’re worth a look if you’re building more than microphones.

Transformerless or transformer-coupled?

Transformerless (TL) circuits, usually based on the Schoeps CM5, are fast, clean and very quiet. Transformer-coupled (TC) circuits, like the KM 84, add harmonic richness and a bit of weight. I build both, but TC is my favorite and my most popular build.

Which transformers do you offer?

Four: Cinemag, AMI, 3U Audio and a Neutrik option for a lo-fi flavor. The transformer is part of the configuration code engraved on every mic, so you’ll always know what’s inside.

Which mics can you rebuild?

Budget large- and small-diaphragm condensers from MXL, Sterling, M-Audio and others. The MXL 990 is the most popular. Not sure about yours? Ask me before you ship it.

Will RockScience sell kits?

Well, sort of… I’ll offer my circuit boards at several levels, from bare PCB to fully assembled, plus the Getwin capsules I use in my builds and a few other parts. My capsule mounts for DIY builds are available now. Stay tuned for that or contact me.

How long does a rebuild take, and is there a warranty?

Rebuilds ship within 7 days of your mic arriving, usually sooner. Every build has a 1-year parts-and-labor warranty.

Microphone-Parts.com and Mic & Mod are independent businesses, not affiliated with RockScience. Neumann, AKG, Schoeps and other names are trademarks of their owners, used here only to describe circuit and capsule styles.